Can’t find what you’re looking for?
Search for it here.

SLIPKOTEĀ® 943 SILIRAMIC DBC GREASE

Description

SLIPKOTE 943 SILARAMIC DBC GREASE is formulated to reduce brake noise, vibrations and harshness (NVH) by dampening all natural brake vibrating frequencies. It is made from pure Polydimethylsiloxane base oils and treated with the latest rust, oxidation and anti-wear additives to provide lasting protection against friction, wear and corrosion. It is fortified with a high concentration of a unique, high temperature ceramic boundary lubricant that will stay in place and protect at extreme temperatures from -50°F to over 3000°F, while providing protection against dirt, corrosion and uneven pad wear. SLIPKOTE 943 SILARAMIC DBC GREASE was designed to be compatible with all plastics and rubbers used in Disc Brake Caliper systems. It meets the Japanese rubber compatibility standard JIS K 2228 with EPDM & Nitrile rubbers.

Advantages

  • PREVENTS RUST & CORROSION 
  • SILENCES CALIPERS 
  • WATERPROOF, WILL NOT WASHOUT 
  • WIDE TEMPERATURE RANGE
  • LASTS THE LIFE OF THE PADS & SHOES 
  • REDUCES WEAR
  • NON-MELTING
  • CHEMICAL RESISTANT 

Usage

SLIPKOTE 943 SILARAMIC DBC GREASE was originally designed as a high performance problem solving, anti-wear and anti-corrosion lubricant for all moving caliper hardware, backing plates and seals of Disc Brake Caliper assemblies. Because SLIPKOTE 943 SILARAMIC DBC GREASE is a pure synthetic, dry-film, boundary lubricant, it is a superior noise dampening compound that will last the life of the brake pads and shoes thus reducing customer’s noise complaints. Due to the non-melting thickener, it will not run out of the brakes onto the friction pads or rotors. The high temperature characteristics make it ideal for all brakes including ceramic brakes, which operate at extremely high temperatures.

Directions

Wire brush the caliper housing and anchor or backing plate to remove all dirt and dust. Apply SLIPKOTE 943 SILARAMIC DBC GREASE to all moving caliper hardware, mating surfaces and steel backing plates of the disc brake pads. Any excessive grease squeezed out from between mating surfaces must be removed. KEEP LUBRICANT OFF PADS AND ROTORS.

Typical Specifications

  • Product: 943 SILARAMIC DBC GREASE
  • Base Oil: Polydimethylsiloxane
  • Thickener: Synthetic
  • Solid Lubricant: Ceramic
  • Color: White
  • Texture: Smooth
Test
Test Method
Typical Results
Worked Penetration, 60 Strokes
ASTM D-217
265 to 295
Dropping Point, °F
ASTM D-2265
None
Flash Point
ASTM D-92
550
Pour Point °F
ASTM D-97
-50
Rust Preventative Test
ASTM D-1743
Pass
Corrosion (50 hrs. 5% Salt Spray)
ASTM B-117
No Rust
Bleed, % (24 hrs. @ 212°F)
ASTM B-117
No Rust
Water Washout @ 100°F, % Loss
ASTM D-1264
0.25
Elastomer Compatibility
JIS K 2228
8.10
EPDM & NITRILE Rubber (72 hrs. @ 248°F (120°C)
EPDM Volume, %
+ 2.4
Hardness
- 2
NITRILE Volume, %
- 3.5
Hardness
+ 4

The name of this product or group of products is for product identification only.  SPECIALTY LUBRICANTS Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products   The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer.  SPECIALTY LUBRICANTS Corporation sales personnel are not authorized to amend this warranty limitation.



Return

Copyright 2017, Specialty Lubricants Corporation. All rights reserved.