Can’t find what you’re looking for?
Search for it here.

SLIPKOTEĀ® 985 CERAMIC DBC LUBE

Description

SLIPKOTE 985 CERAMIC DBC GREASE is formulated from pure synthetic base oils and treated with the latest rust, oxidation and anti-wear additives to provide lasting protection against friction, wear and corrosion. It is fortified with a high concentration of a unique, high temperature ceramic boundary lubricant that will stay in place and protect at extreme temperatures from -50°F to over 3000°F. while providing protection against dirt, corrosion and uneven pad wear

SLIPKOTE 985 CERAMIC DBC GREASE was designed to be compatible with most plastics and rubbers, especially ethylene propylene rubber (EPDM, EP or EPT) commonly used in Disc Brake Caliper systems. The distinctive Purple color makes it easy to identify during and after application.

Advantages

  • PREVENTS RUST & CORROSION
  • SILENCES CALIPERS
  • WATERPROOF, WILL NOT WASHOUT
  • LASTS THE LIFE OF THE PADS & SHOES
  • NON MELTING
  • CHEMICAL RESISTANT
  • WIDE TEMPERATURE RANGE
  • REDUCES WEAR

Usage

SLIPKOTE 985 CERAMIC DBC GREASE was originally designed as a high performance problem solving, anti-wear and anti-corrosion lubricant for all moving caliper hardware, backing plates and seals of Disc Brake Caliper assemblies. Because SLIPKOTE 985 CERAMIC DBC GREASE is a pure synthetic, high concentration dry-film, boundary lubricant it is a superior noise dampening compound that will last the life of the brake pads and shoes thus reducing customer comebacks resulting from noise complaints.

Directions

Wire brush the caliper housing and anchor plate to remove all dirt and dust. Apply SLIPKOTE 985 Ceramic DBC Grease to all moving caliper hardware, mating surfaces and steel backing plates of the disc brake pads. Any excessive grease squeezed out from between mating surfaces must be removed. KEEP LUBRICANT OFF BRAKE PADS AND ROTORS.

STORAGE & SHIPPING LIMITATION: None - Handle as a normal petroleum product.

Typical Specifications

  • Product: 985 Ceramic DBC Grease
  • Solid Lubricant: Ceramic
  • Base Oil: Synthetic
  • Thickener: Synthetic
  • Color: Purple
  • Texture: Tacky
TEST
TEST METHOD
TYPICAL RESULTS
Worked Penetration (60 Strokes)
ASTM D-217
265 - 295
Dropping Point, °F
ASTM D-2265
None
Rust Preventative Test
ASTM D-1743
Pass
Bleed, % (24 hrs. @ 212°F)
FS 791-321-2
None
Evaporation (24 hrs @ 212°F)
FS 791-32-2
.30
Water Washout @ 100°F, % Loss
ASTM D-1264
2.0
Timken OK Load, lbs
ASTM D-2509
45
Four-Ball Wear Scar, mm (40 kg. 1 hr 1200 RPM)
ASTM D-2266
0.6
Operating Temperature, °F
-50°F to + 3000°F
The name of this product or group of products is for product identification only.  SPECIALTY LUBRICANTS Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products   The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer.  SPECIALTY LUBRICANTS Corporation sales personnel are not authorized to amend this warranty limitation.



Return

Copyright 2017, Specialty Lubricants Corporation. All rights reserved.