Can’t find what you’re looking for?
Search for it here.

SLIPKOTE® 220R SILICONE GREASE

Description

SLIPKOTE GUN OIL 163 is a mineral oil based lubricant designed for the extreme lubrication demands for all classic and modern firearms. SLIPKOTE GUN OIL 163 combines the finest base oils, coupled with the latest corrosion inhibitor and extreme additives available. This combination reduces metal-to-metal contact wear which increases the working life of the firearm and helps to maintain its value.

SLIPKOTE 220-R SILICONE GREASE represents the latest technology in lubrication. It is formulated from pure silicone base oils and selectively treated with rust, oxidation and anti-wear additives coupled with a shear stable thickener to provide maximum parts protection in a wide range of temperatures from -50°F to 570°F (-45°C to 298.8°C) SLIPKOTE 220-R SILICONE GREASE primary properties are that it is non-melting, has a high dielectric strength, low volatility and is insoluble in water, methanol, ethanol, dilute acids, caustics, glycol, glycerine, vegetable and mineral oils.

SLIPKOTE 220-R SILICONE GREASE is designed to be compatible with most plastics and rubbers, especially ethylene propylene terpolymer (EPDM, EPT) commonly used in Disc Brake Caliper systems.

SLIPKOTE 220-R SILICONE GREASE is also NSF/U.S.D.A. H-1 *Registered and KOSHER approved, which gives it full acceptability for use in ALL areas where incidental food or potable water contact may occur.

Advantages

  • PREVENTS RUST & CORROSION
  • CHEMICAL RESISTANT
  • WIDE TEMPERATURE RANGE
  • HIGH DIELECTRIC STRENGTH
  • MEETS MIL-S-8660C SPECIFICATIONS
  • NON MELTING
  • EXTREMELY LOW VOLATILITY
  • WATERPROOf, WILL NOT WASHOUT
  • REDUCES WEAR
  • *NSF H-1 Registered and KOSHER Approved

Usage

SLIPKOTE 220-R SILICONE GREASE was originally designed as a problem solving, anti-corrosion lubricant for all moving caliper hardware, backing plates and seals of Disc Brake Caliper assemblies. However, due to its water, chemical and corrosion resistance capabilities it is an excellent choice in a wide variety of automotive, marine, agriculture, household and industrial applications. Some of its diversified uses include:

  • DISC BRAKE CALIPERS
  • BRAKE HARDWARE
  • SPARK PLUG BOOTS
  • BATTERY TERMINALS
  • ELECTRICAL CONNECTIONS
  • WEATHER STRIPPING
  • GASKETS AND O-RINGS
  • VALVES
  • SLIDES AND WAYS
  • POOL EQUIPMENT
  • BUSHINGS
  • MOTION CONTROLLERS


Typical Specifications

Product: 220-R Silicone GreaseTemperature Range: -50°F to 570°F (-45°C to 298.8°C)
Base Oil: PolydimethylsiliconeThickener: Synthetic
Color: Translucent WhiteTexture: Tenacious

TestTest Method
Result
Penetration
Worked 60 strokes, mm
NLGI No.

ASTM D-217
ASTM D-217

230-245
3
Flash Point, °F (°C)ASTM D-92570 (298.9)
Dropping Point, °F (°C)
ASTM D-566None
Pour Point, °F (°C)
ASTM D-9750 (-45.)
Base Oil Corrosion Test:
Procedure A (distilled water)
Procedure B (synthetic sea water

ASTM D-665
ASTM D-665

Pass
Pass
Oil Separation, % Loss
24 hrs. @ 392°F (200°C)

FTM 791.321

0.0
Evaporation Loss, %
24 hrs. @ 392°F (200°C)

FTM 791.321

38
Elastomer Compatibility
EPDM Rubber, % Change (70 hrs. @ 250°F (121°C)
Hardness
Swell


ASTM D-4289
ASTM D-4289


2.4
1.8
Corrosion Test, 100 hrs. @ 120°F (49°C)
ASTM D-1748
Pass
Water Washout, % max.
ASTM D-12641.0
Dielectric Strength volts/mil, min.
ASTM D-149800
Volume Resistivity, OHM-cm
ASTM D-2571×1013
Dielectric ConstantASTM D-150
2.8

 


The name of this product or group of products is for product identification only. SPECIALTY LUBRICANTS Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. SPECIALTY LUBRICANTS Corporation sales personnel are not authorized to amend this warranty limitation.