Can’t find what you’re looking for?
Search for it here.

SLIPKOTE® AQUAPLEX 985

Description

SLIPKOTE AQUAPLEX 985 is a versatile, pure synthetic, completely waterproof grease containing PTFE. It is formulated to seal out water and lubricate under the most adverse conditions.   SLIPKOTE AQUAPLEX 985 with its highly adhesive qualities and high load-carrying characteristics forms a tough durable film of lubrication that prevents metal-to-metal contact even under severe shock loads.  SLIPKOTE AQUAPLEX 985 is also NSF/U.S.D.A. H-1 *Registered and KOSHER approved, which gives it full acceptability for use in ALL areas where incidental food or potable water contact may occur.

Advantages

  • NSF/U.S.D.A. H-1 *Registered
  • WATERPROOF
  • NON-MELTING
  • CONTAINS PTFE
  • KOSHER APPROVED
  • BIODEGRADABLE
  • CHEMICALLY RESISTANT
  • NON-STAINING
  • WIDE TEMPERATURE RANGE
  • REDUCES WEAR
  • PREVENTS RUST & CORROSION
  • HIGH DIELECTRIC STRENGTH

*NSF H-1 Registration No. 059322

Usage

SLIPKOTE AQUAPLEX 985 with its waterproof and chemical resistant capabilities is an excellent lubricant on all sliding surfaces, gears and slow to moderate speed bearings (about 1000 RPM maximum) operating in WET or DRY conditions from 20°F to 350°F. Due to its pure synthetic base, coupled with the addition of sub-micron size PTFE, SLIPKOTE AQUAPLEX 985 is an excellent choice for applications in many Industries, which requires a clean, tenacious, anti-wear grease. Because of its NSF/U.S.D.A. H-1 *Registration, SLIPKOTE AQUAPLEX 985 is outstanding for use in food processing plants, where equipment wash down is an everyday requirement and water Industries, where contamination with conventional petroleum lubricants is a primary environmental concern.

SLIPKOTE AQUAPLEX 985 is compatible with most rubbers and plastics and is a superior lubricant for “O” rings. Some of its diversified uses include:

  • OPEN GEARS
  • FOOD EQUIPMENT
  • SLIDES AND WAYS
  • STERILIZER CHAINS
  • GASKETS AND “O” RINGS
  • CONVEYORS
  • VALVES
  • BUSHINGS
  • TRUNNIONS
  • POOL EQUIPMENT

Typical Specifications

Product: AQUAPLEX 985
Solid Lubricant: PTFENSF/U.S.D.A. Rating: H-1
Base Oil: SyntheticThickener: Synthetic
Color: Translucent WhiteTexture: Smooth & Tenacious
TestASTM Test MethodResults
N.L.G.L.Grade2
Worked Penetration
60 Strokes
10,000 Strokes

D-217
D-217

280
290
Base Oils Viscosity,
cSt @ 100°C
cSt @ 40°C

D-445
D-445

200
7800
Pour Point, °FD-9720
Flash Point, °FD-92350
Dropping Point °FD-566None
Evaporation Loss, % (10 hours @ 210°F)D-9721.0
Corrosion Preventative TestD-1743PASS
Water Washout, % LossD-12640.01
Timken OK Load, lbs.D-250940
4-Ball Wear Scar, mm (40 Kg, 75 ° C, 1 hr. @ 1200 rpm)D-22660.57
Dielectric Strength, KVD-87730

The name of this product or group of products is for product identification only.  SPECIALTY LUBRICANTS Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products   The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer.  SPECIALTY LUBRICANTS Corporation sales personnel are not authorized to amend this warranty limitation.